Shop

Nd:Ce:YAG

Nd:Ce:YAG crystals Cerium is used as sensitizer for Nd3+ ions because of its strong absorption in UV region. Ce increases transfer to the Nd3+ excited state. At this point with the same pumping parameters thermal distortion in Nd: Ce:YAG is smaller  and in Nd:YAG output laser energy is greater than usual. Emission wavelength at 1064 nm and thermal conductivity of the Nd:Ce:YAG crystals are the same as for Nd:YAG.

 

Add to cart for your request

You can specify desired parameters during checkout.

  • Optola offers standard diameters from 1mm to 10 mm with length up to 80 mm.
  • Non-standard sizes are available upon request.
Dopant concentration Nd: 0.9─1.3 atm %, Ce : Nd=1:10
orientation <111> crystalline direction within 5ºC
Flatness <λ/10
Parallism ≤10 arc seconds
Perpendicularity ≤5 arc minutes
Surface Quality 10/5 Scratch/Dig
Optical Quality Interference fringes ≤ 0. 25 λ /inch
Extinction ration ≥ 30dB
Dimensional tolerances Diameter: +0.1″ Length: ±0.5″
Chamfer:< 0.1 mm @45°
AR-Coating Reflectivity ≤ 0.2% (@1064nm)
Chemical formula Nd3+: Ce3+: Y3Al5O12
Crystal Structure Cubic
Lattice Parameters 12.01A
Melting Point 1970℃
Moh Hardness 8.5
Density 4.56 ± 0.04g/cm3
Specific Heat (0-20) 0.59J/g.cm3
Modulus of Elasticity 310GPa
Young’s Modulus 3.17×104Kg/mm2
Poisson Ratio 0.3(est.)
Tensile Strength 0.13~0.26GPa
Thermal Expansion Coefficient [100]:8.2 × 10-6/℃
[110]:7.7 × 10-6/℃
[111]:7.8 × 10-6/℃
Thermal Conductivity 14W/m/K(@25℃ )
Thermal Optical Coefficient (dn/dT) 7.3×10-6/℃
Thermal Shock Resistance 790W/m
Laser Transition 4F3/2 –> 4I11/2
Laser Wavelength 1.064μm
Photon Energy 1.86×10-19J@1.064μm
Emission Linewidth 4.5A @1.064μm
Emission Cross Section 2.7~8.8×10-19cm-2
Fluorescence Lifetime 230μs
Index of Refraction 1.8197@1064nm
Categories: ,
All search results
0